ABB ACS880 Firmware Manual page 393

No. Name / Range /
Selection
33.41 Edge counter 2 warn
limit
0...4294967295
33.42 Edge counter 2
function
b0 Counter mode
b1 Warning enable
b2 Count rising edges
b3 Count falling edges
b4...15 Reserved
0000h...FFFFh
33.43 Edge counter 2
source
False
True
RO1
Other [bit]
33.44 Edge counter 2
divider
1...4294967295
33.45 Edge counter 2 warn
message
Edge counter 2
exceeded
Counted main
contactor
Counted output
relay
Counted motor
starts
Description
Sets the warning limit for signal edge counter 2.
Warning limit for signal edge counter 2.
Configures signal edge counter 2.
0 = Loop: When the limit is reached, the counter is reset.
The counter status (bit 3 of 33.1) remains 1 until the
counter is again incremented. The warning (if enabled)
stays active for at least 10 seconds.
1 = Saturate: After the limit is reached, the counter
status (bit 3 of 33.1) remains 1 until
warning (if enabled) also stays active until
reset.
Warning enable
0 = Disable: No warning is given when the limit is
reached
1 = Enable: A warning (see 33.45) is given when the limit
is reached
Count rising edges
0 = Disable: Rising edges are not counted
1 = Enable: Rising edges are counted
Count falling edges
0 = Disable: Falling edges are not counted
1 = Enable: Falling edges are counted
Selects the signal to be monitored by signal edge
counter 2.
0.
1.
Bit 0 of 10.21 RO status (page
See Terms and abbreviations (page
Defines a divisor for signal edge counter 2. Determines
how many signal edges increment the counter by 1.
Divisor for signal edge counter 2.
Selects the optional warning message for signal edge
counter 2.
A889 Edge counter 2. The message text can be edited
on the control panel by choosing Menu – Settings – Edit
texts.
A884 Main contactor.
A881 Output relay.
A882 Motor starts.
33.40 is reset. The
33.40 is
214).
169).
Parameters 393
Def / Type
FbEq 16b / 32b
- / uint32
- / -
- / uint16
1 = 1
False / uint32
0
1
2
1 / uint32
- / -
Edge counter 2
exceeded / uint32
3
11
12
13