If Power Is Lost To The Modeler; During Normal System Power-Down; Access Doors And Panels - Stratasys Fortus 360mc User Manual

If power is lost to the modeler

• The UPS allows the modeler to complete its cool-down cycle and then shuts
itself off.
• If power is restored to the modeler during the shut-down process, the shut-
down will continue. The modeler can be re-started when shut-down is
complete (push the green button on the front panel).

During normal system power-down

• The UPS allows the modeler to complete its cool-down cycle and then shuts
itself off.
• The modeler can be re-started when shut-down is complete (push the green
button on the front panel).

Access Doors and Panels

Warning: The rear access panels should only be removed by a
Stratasys service technician.
This system has been designed to allow easy access to the most frequently
accessed areas on the system. Doors and Panels that you may need to open or
remove are highlighted in
Figure 3-1: UPS Power switch location
UPS
Switch
Figure 3-2
3-2
& Figure 3-3.