Change Modeler Default Values; Display Units; Part Build Location - Stratasys FORTUS 360mc Manual

• Use the arrow keys to scroll up or down through the available
sample jobs, or to select a job in the sample queue.
• Press the Enter key to build the selected job.
• Additional files can be stored in the sample job queue from the
standard job queue (press 9 to copy a job from the standard job
queue into the sample queue).
• User-added sample job files can be deleted by pressing the
DEL key.

Change Modeler Default Values

Factory presets can be changed from the
1.
From the Main Menu select
Build Job..
Operator Control..
Modeler Status..
>Maintenance..
2.
Select
Modeler Default..
>Modeler Default..
Administration..
Reboot system..
Measure Flatness <E>

Display Units

Select
Display Units
inches)
> Display Units = in (Inches)
User Placement on Platen:

Part Build Location

The part build location can be viewed or changed from the
menu (press ENTER to toggle between
on Platen
1.
If User Placement is set to
of the platen.
2.
If User Placement is set to
the bounding box (the imaginary box surrounding the part - used by
4-30
FORTUS 360mc/400mc and FDM 360mc/400mc User Guide
Maintenance
|*Tips: Model T16
|*
and press ENTER.
. Inches or metric can be selected (factory setting is in
(default) - the part will build in the center
NO
- the position of the front, left corner of
YES
Modeler Default..
and press ENTER.
Support T16
<E>
No
and
YES
menu.
User Placement
).
NO