Digi TX54 User Manual page 708

Applications
Type "help", "copyright", "credits" or "license" for more information.
>>>
3. Import the location submodule:
>>> from digidevice import location
4. Update the location object with the latest location data:
>>> loc = location.Location()
>>> loc.position
>>> (44.926195299999998, -93.397084499999999, 292.39999399999999)
>>> loc.update()
>>> loc.position
44.926231, -93.397923, 289.439229
>>>
5. Use Ctrl-D to exit the Python session. You can also exit the session using exit() or quit().
Output location data in json format
The location submodule takes a snapshot of the current location and stores it in the runtime
database. You can update this snapsot
1. Log into the TX54 command line as a user with shell access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type shell to access the device shell.
2. At the shell prompt, use the python command with no parameters to enter an interactive
Python session:
# python
Python 3.6.13 (default, May
[GCC 8.3.0] on linux
Type "help", "copyright", "credits" or "license" for more information.
>>>
3. Import the json submodule:
>>> import json
4. Import the location submodule:
>>> from digidevice import location
5. Print the location data in json format:
>>> geojson_data = location.Location().geojson
>>> print(json.dumps(geojson_data, indent=4))
{
"type": "Feature",
"geometry": {
TX54 User Guide
"type": "Point",
"coordinates" [
9 2021, 22:49:59)
Digidevice module
708