Table of Contents
Advertisement
Hotspot
c. (Optional) Set the port number to use for RADIUS authentication requests.
(config)> network hotspot hotspot_name radius auth_port port
(config)>
The default is 1812.
d. (Optional) Set the port number to use for RADIUS accounting requests.
(config)> network hotspot hotspot_name radius acct_port port
(config)>
The default is 1813.
e. Set the shared secret for the RADIUS server. This is configured on the RADIUS server.
(config)> network hotspot hotspot_name radius secret secret
(config)>
f. Set the unique Network Access Server (NAS) identifier used by the RADIUS server:
(config)> network hotspot hotspot_name radius nas_id id
(config)>
The default is hotspot.
g. (Optional) Enable Swap Octets to swap the meaning of the input octets/packets and
output octets/packets RADIUS attributes. This can fix issues if the data limits and/or
accounting reports appear to be reversed on the RADIUS server:
(config)> network hotspot hotspot_name radius swap octets true
(config)>
The default is disabled.
6. Set walled garden settings.
Walled garden settings define the "white list" of domains and subnets that unauthenticated
clients are able to access. Include the domain or subnet of the RADIUS server(s) that are being
used for authentication.
Add domains that can be accessed by the client prior to authentication:
n
(config network hotspot new_hotspot)> add walled_garden domains end
domain_name
(config network hotspot new_hotspot)>
Repeat to add additional domains.
Add IP addresses and subnets that can be accessed by the client prior to
n
authentication:
(config network hotspot new_hotspot)> add walled_garden subnets end
value
(config network hotspot new_hotspot)>
where value is an IPv4 address and optional subnet mask, using the format IPv4_
address[/netmask], or the keyword any.
TX54 User Guide
Hotspot configuration
323
Advertisement
Table of Contents
