Configure The Tx54 Device To Use Custom Factory Default Settings - Digi TX54 User Manual

Hide thumbs Also See for TX54:

Table of Contents

System administration

5. Save the configuration and apply the change:

(config)> save

Configuration saved.

6. Type exit to exit the Admin CLI.

Depending on your device configuration, you may be presented with an Access selection

menu. Type quit to disconnect from the device.

Configure the TX54 device to use custom factory default settings

You can configure your TX54 device to use custom factory default settings. This way, when you erase

the device's configuration, the device will reset to your custom configuration rather than to the

original factory defaults.

To clear the custom default configuration, press the RESET button, wait for the device to reboot,

then press the RESET button again.

Required configuration items

Custom factory default file

1. Log into the TX54 WebUI as a user with Admin access.

2. Configure your TX54 device to match the desired custom factory default configuration.

For example, you may want to configure the device to use a custom APN or a particular

network configuration, so that when you reset the device to factory defaults, it will

automatically have your required network configuration.

3. On the main menu, click System. Under Configuration, click Configuration Maintenance.

The Configuration Maintenance windows is displayed.

TX54 User Guide

Erase device configuration and reset to factory defaults