Digi TX54 User Manual page 274

Wi-Fi
o
o
o
o PEAP: Username/password authentication.
If PEAP is selected, identify the username and password.
SCEP certificates: Simple Certificate Enrollment Protocol (SCEP) certificate
o
management.
If SCEP certificates is selected:
o
o
WAN assignment. Once you configure a Wi-Fi client, you must assign the Wi-Fi client to a WAN.
n
See Wide Area Networks (WANs) and Wireless Wide Area Networks (WWANs)
information.
Additional configuration items
Enable and configure background scanning, which allows the Wi-Fi client to move between
n
access points that have the same SSID as their signal strength varies.
Additional access points that client will attempt to use. If connection to one access point fails,
n
the device will attempt to connect to the next access point in the list.
To configure a Wi-Fi client:

WebUI
1. Log into the TX54 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > WiFi > Client mode connections.
TX54 User Guide
The client certificate in PEM format.
The private key in PEM format.
(Optional) The private key passphrase.
Identify the username.
Select the SCEP client. See
client for information about SCEP clients.
Configure a Wi-Fi client and add client networks
Configure a Simple Certificate Enrollment Protocol
for further
274