Digi TX54 User Manual page 337

Hotspot
The File System page appears.
c. Highlight the hotspot directory and click  to open the directory.
d. Click  (upload).
e. Browse to the location of the HTML file on your local machine. Select the file and click
Open to upload the file.
2. Configure the hotspot to use your custom HTML file:
a. On the menu, click Network > Hotspot.
b. Click the name of the appropriate hotspot to expand.
c. Ensure that Login page source is set to Local.
d. For Login page, type the name of your custom HTML file.
e. Click Apply to save the configuration and apply the change.

Command line
1. Log into the TX54 command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Use the scp
For example:
> scp host 192.168.4.1 user admin remote /home/admin/temp/ local
/etc/config/hotspot/custom.html to local
3. Configure the hotspot to use your custom HTML file:
a. Type config to change to configuration mode:
> config
(config)>
b. Set login to local-page:
(config)> network hotspot hotspot_name login local
(config)>
c. Set local-page to your custom HTML file:
(config)> network hotspot hotspot_name local-page custom.html
TX54 User Guide
command to upload the edited file from your local machine the the TX54 device.
Customize the hotspot login page
337