Digi TX54 User Manual page 301

Hotspot
5. For Maximum upload speed, type the maximum upload speed in kilobytes per second (Kbps).
6. Click Apply to save the configuration and apply the change.

Command line
1. Log into the TX54 command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the command line, type config to enter configuration mode:
> config
(config)>
3. Change the default maximum download speed:
(config)> network hotspot hotspot bandwidth_max_down value
(config)>
where value is an integer between 1 and 100000 and represents the maximum download speed
in Kbps.
4. Change the default maximum upload speed:
(config)> network hotspot hotspot bandwidth_max_up value
(config)>
where value is an integer between 1 and 100000 and represents the maximum upload speed in
Kbps.
5. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
TX54 User Guide
Hotspot configuration
301