Table of Contents
Advertisement
Wi-Fi
1. Log into the TX54 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > WiFi.
4. Click to expand the appropriate Wi-Fi radio. For single-Wi-Fi models, there is only one radio
listed.
5. For Frequency band, select either 2.4 GHz or 5 GHz.
6. For Access point mode, select the appropriate mode. Only modes appropriate for the selected
band are displayed.
7. Click Apply to save the configuration and apply the change.
Command line
TX54 User Guide
Configure the Wi-Fi radio's band and protocol
239
Advertisement
Table of Contents
