Table of Contents
Advertisement
Monitoring
Enable the Bluetooth scanner
The Bluetooth scanner allows you to configure your TX54 device to detect BLE-enabled devices that
are nearby, and can be configured to open an SSH port that remote hosts can access to read basic
information about those devices.
For users to view the output of the Bluetooth scanner, they must be a member of an authentication
group that has Bluetooth scanner access enabled. See
authentication group configuration information.
Required configuration
Enable the Bluetooth scanner.
n
Additional configuration
The amount of time that the record of a device connection is kept before the device is
n
considered out of range, and the record is expired from the database.
A remote host to view the output of the service.
n
The SSH port used by the Bluetooth scanner to stream output to a remote host.
n
The access control list for the SSH port used by the Bluetooth scanner to stream output to a
n
remote host.
When the Bluetooth scanner is enabled, the TX54 device will automatically configure its
firewall rules to allow incoming connections on the configured listening port. You can restrict
access by configuring the access control list for the Bluetooth scanner's listening port.
Multicast DNS (mDNS) support.
n
WebUI
1. Log into the TX54 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
TX54 User Guide
Enable the Bluetooth scanner
Add an authentication group
for
918
Advertisement
Table of Contents
