Table of Contents
Advertisement
Interfaces
New LANs are enabled by default. To disable, click Enable.
5. For Interface type, leave at the default setting of Ethernet.
6. For Zone, select the appropriate firewall zone. See
information.
7. For Device, select an Ethernet device, a Wi-Fi access point, or a bridge. See
information about bridging.
8. (Optional) Click to expand 802.1x to configure 802.1x port based network access control.
The TX54 can function as an 802.1x authenticator; it does not function as an 802.1x supplicant.
a. Click to expand Authentication.
b. Click Enable server to enable the 802.1x authenticator on the TX54 device.
c. Type the Server IP address of the authentication server.
d. Server Port number defaults to 1812. Type a new port number for the authentication
server if different than the default.
e. Type the Server Password for the authentication server.
f. Set the Reauth period.
g. (Optional) Click to expand Accounting.
h. Click Enable server to enable 802.1x authentication auditing on the TX54 device.
i. Type the Server IP address of the auditing server.
j. Server Port number defaults to 1813. Type a new port number for the auditing server if
different than the default.
k. Type the Server Password for the auditing server.
9. Configure IPv4 settings:
a. Click to expand IPv4.
IPv4 support is enabled by default.
b. For Type, select Static IP address.
c. For Address, type the IP address and subnet of the LAN interface. Use the format IPv4_
address/netmask, for example, 192.168.2.1/24.
d. Optional IPv4 configuration items:
i. Set the Metric.
ii. For Weight, type the relative weight for default routes associated with this interface.
For multiple active interfaces with the same metric, Weight is used to load balance
traffic to the interfaces.
iii. Set the Management priority. This determines which interface will have priority for
central management activity. The interface with the highest number will be used.
iv. Set the MTU.
TX54 User Guide
Local Area Networks (LANs)
Firewall configuration
for further
Bridging
for more
143
Advertisement
Table of Contents
