Restore The Device Configuration - Digi TX54 User Manual

System administration
The file will be downloaded using your browser's standard download process.

Command line
1. Log into the TX54 command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Enter the following:
> system backup path [passphrase passphrase] type type
where
path is the location on the TX54's filesystem where the configuration backup file should
n
be saved.
passphrase (optional) is a passphrase used to encrypt the configuration backup.
n
type is the type of backup, either:
n
l
l
For example:
> system backup /etc/config/scripts/ type archive
3. (Optional) Use scp to copy the file from your device to another host:
> scp host hostname-or-ip user username remote remote-path local local-
path to remote
where:
hostname-or-ip is the hostname or ip address of the remote host.
n
username is the name of the user on the remote host.
n
remote-path is the location on the remote host where the file will be copied.
n
local-path is the path and filename on the TX54 device.
n
For example:
> scp host 192.168.4.1 user admin remote /home/admin/bin/ local
/etc/config/backup-archive-0040FF800120-19.05.17-19.01.17.bin to remote

Restore the device configuration

You can restore a configuration file to your TX54 device by using a backup from the device, or a
backup from a similar device.

WebUI
TX54 User Guide
archive: Creates a binary archive file containing the device's configuration,
certificates and keys, and other information.
cli-config: Creates a text file containing only the configuration changes.
Configuration files
892