Step 3: Set Up Access To Digi Remote Manager; Step 4: Register Your Device; Step 5: Complete Setup; Step 6: Configure Cellular Apn - Digi TX54 User Manual

Digi TX54 Quick Start

Step 3: Set up access to Digi Remote Manager

If you already have a Digi Remote Manager account, skip to
n
If you prefer to configure the device locally rather than using Remote Manager, see
n
Configuration and management
To set up access to Remote Manager:
1. Go to shop.digi.com
You will receive an email from Remote Manager after your registration is complete.
2. Click the link in the email to go to Remote Manager and click Forgot Password to set up your
login and password.
3. Log into Remote Manager.

Step 4: Register your device

Register the device as instructed by

Step 5: Complete setup

1. The device should connect within a couple of minutes.
2. If newer firmware is available, Remote Manager will prompt you to update the device. Click
Update to update the firmware. Remote Manager will perform the update in the background
and let you know when the device is up to date.
3. Click Done when the firmware update is complete.

Step 6: Configure cellular APN

If you installed a SIM in
your SIM was setup with a custom APN, you will need to configure it manually:
1. Navigate to the Settings tab in the Remote Manager Device Details view.
2. Expand the Config menu item and click on the Network settings menu.
3. Expand Interfaces > WWAN1 > APN list > APN list 1.
4. For APN, enter the custom APN provided by your cellular provider.
TX54 User Guide
in the TX54 User Guide.
to create a new Remote Manager account.
the getting started
step 3, the device will attempt to setup the APN automatically. However, if
Step 3: Set up access to Digi Remote Manager
Register your
wizard.
device.
25