Digi TX54 User Manual page 216

Hide thumbs Also See for TX54:

Table of Contents

The new USB serial port is enabled by default. Toggle Enable off to disable. USB serial port is

currently the only option for Type.

5. For USB port, select the appropriate USB port.

6. (Optional) If the device's USB port is connected to a USB hub, for USB hub path, type the path

to a USB-to-serial adapter on the hub. Leave this field blank if the if the USB-to-serial adapter

is connected directly to the device's USB port.

7. (Optional) USB devices with multiple ports may identify ports by using an interface descriptor.

For USB interface descriptor, type the appropriate descriptor number. Leave this option at

the default of 0 for USB devices with only one serial port.

8. (Optional) USB devices with multiple ports may identify ports by using a port number. For USB

port number, type or select the appropriate port number. Leave this option at the default of 0

for USB devices with only one serial port.

9. For Serial mode, select one of the following:

Remote access: Allows for remote access to another device that is connected to the

serial port.

Application: Provides access to the serial device from Python applications. See

Python to access serial ports

access the serial port.

Modbus: Allows you to use the serial port for Modbus. See

UDP serial: Provides access to the device through a UDP serial port. See

10. (Optional) For Label, type a descriptive label for this serial port.

11. If Login, Remote access, or Modbus is selected for Serial mode:

a. For Baud rate, select the baud rate used by the device to which you want to connect.

b. For Data bits, select the number of data bits used by the device to which you want to

c. For Parity, select the type of parity used by the device to which you want to connect.

TX54 User Guide

for information about creating Python applications that

Add a USB serial port

Configure UDP