Wi-Fi
Isolate Wi-Fi clients
Client isolation prevents wireless clients connected to the TX54 device from communicating with
other clients. There are two mechanisms for client isolation configuration:
Isolate clients connected to the same access point
n
Isolate clients connected to different access points
n
This section provides instructions for both mechanisms.
Isolate clients connected to the same access point
WebUI
1. Log into the TX54 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > WiFi > Access points.
4. Create a new access point or modify an existing access point. See
access
point,
point with enterprise
5. Enable Isolate clients.
6. Click Apply to save the configuration and apply the change.
Command line
TX54 User Guide
Configure a Wi-Fi access point with personal
security.
Isolate Wi-Fi clients
Configure an open Wi-Fi
security, or
Configure a Wi-Fi access
265