Change The Default Hotspot Bandwidth Limits - Digi TX54 User Manual

Hotspot
5. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
6. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Change the default hotspot bandwidth limits

Required configuration items
Enable default hotspot configuration. See
n
instructions.
Maximum download speed, in Kbps.
n
Maximum upload speed, in Kbps.
n
To change the default hotspot IP address and subnet:

WebUI
1. Log into the TX54 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > Hotspots > hotspot.
4. For Maximum download speed, type the maximum download speed in kilobytes per second
(Kbps).
TX54 User Guide
Enable hotspot using the default configuration
Hotspot configuration
for
300