Digi TX54 User Manual page 380

Routing
Configure the VRRP interface's DHCP server to use a custom gateway that corresponds to
l
one of the VRRP virtual IP addresses.
Backup devices only:
n
Enable and configure SureLink on the VRRP interface.
l
Set the IP gateway to the IP address of the VRRP interface on the master device.
l
Additional configuration items
For backup VRRP devices, enable the ability to monitor the VRRP master, so that a backup
n
device can increase its priority when the master device fails SureLink tests.

WebUI
1. Log into the TX54 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > VRRP.
4. Create a new VRRP instance, or click to expand an existing VRRP instance.
See Configure VRRP
TX54 User Guide
for information about creating a new VRRP instance.
Virtual Router Redundancy Protocol (VRRP)
380