Allow Remote Access For Web Administration And Ssh - Digi TX54 User Manual

Services

Allow remote access for web administration and SSH

By default, only devices connected to the TX54's LAN have access to the device via web administration
and SSH. To enable these services for access from remote devices:
The TX54 device must have a publicly reachable IP address.
n
The External firewall zone must be added to the web administration or SSH service. See
n
Firewall configuration
See Set the idle timeout for TX54 users
n
the web administration and SSH services.
To allow web administration or SSH for the External firewall zone:
Add the External firewall zone to the web administration service

WebUI
1. Log into the TX54 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Services > Web administration > Access Control List > Zones.
4. For Add Zone, click .
TX54 User Guide
Allow remote access for web administration and SSH
for information on zones.
for information about setting the inactivity timeout for
543