Run A Python Application At The Shell Prompt - Digi TX54 User Manual

Hide thumbs Also See for TX54:

Table of Contents

Applications

1. Log into the TX54 WebUI as a user with Admin access.

2. At the Status page, click Scripts.

The Scripts page displays:

Command line

1. Log into the TX54 command line as a user with Admin access.

Depending on your device configuration, you may be presented with an Access selection

menu. Type admin to access the Admin CLI.

show scripts

> show scripts

3. Type exit to exit the Admin CLI.

Depending on your device configuration, you may be presented with an Access selection

menu. Type quit to disconnect from the device.

Run a Python application at the shell prompt

Python applications can be run from a file at the shell prompt. The Python application will run until it

completes, displaying output and prompting for additional user input if needed. To interrupt the

application, enter CTRL-C.

Python applications cannot be run from the Admin CLI. You must access the device shell in order

to run Python applications from the command line. See

configuring authentication groups that include shell access.

1. Upload the Python application to the TX54 device:

TX54 User Guide

command at the system prompt:

Run a Python application at the shell prompt

Authentication groups

for information about