Table of Contents
Advertisement
Wi-Fi
4. For Add WiFi client:, type the name of the client and click .
The Wi-Fi client configuration window is displayed.
New Wi-Fi clients are enabled by default. To disable, or to enable a client if it has been
disabled, click Enable.
5. For Radio, select the appropriate Wi-Fi radio. Applies to dual-Wi-Fi models only.
6. Configure the Wi-Fi network that the client will use:
a. Click to expand SSID list.
b. Enter the SSID of the access point that the client will use to connect to the Wi-Fi network.
c. Select the type of Encryption used by the access point.
n
n
TX54 User Guide
If a personal or mixed mode is selected, for Pre-shared key, enter the password
that the client will use to connect to the access point.
If WPA2 Enterprise is selected:
Select the Extensible Authentication Protocol (EAP), one of:
l
TLS: Client certificate authentication.
o
If TLS is selected, include:
The Username.
o
The CA certificate in PEM format.
o
The Client certificate in PEM format.
o
The Private key in PEM format.
o
o
(Optional) The Private key passphrase.
PEAP: Username/password authentication.
o
If PEAP is selected, identify the Username and Password.
SCEP certificates: Simple Certificate Enrollment Protocol (SCEP) certificate
o
management.
If SCEP certificates is selected:
Identify the Username.
o
o
Select the SCEP Client. See
Protocol client
for information about SCEP clients.
Configure a Wi-Fi client and add client networks
Configure a Simple Certificate Enrollment
275
Advertisement
Table of Contents
