Digi TX54 User Manual page 167

Interfaces
n
The default is auto.
c. Determine how the DHCP server should broadcast the the MTU:
(config)> network interface my_lan ipv4 dhcp_server advanced mtu value
(config)>
where value is one of:
n
n
n
The default is auto.
d. Set the domain name that should be appended to host names:
(config)> network interface my_lan ipv4 dhcp_server advanced domain_
suffix name
(config)>
e. Set the IP address or host name of the primary and secondary DNS, the primary and
secondary NTP server, and the primary and secondary WINS servers:
(config)> network interface my_lan ipv4 dhcp_server advanced primary_
dns value
(config)> network interface my_lan ipv4 dhcp_server advanced
secondary_dns value
(config)> network interface my_lan ipv4 dhcp_server advanced primary_
ntp value
(config)> network interface my_lan ipv4 dhcp_server advanced
secondary_ntp value
(config)> network interface my_lan ipv4 dhcp_server advanced primary_
wins value
(config)> network interface my_lan ipv4 dhcp_server advanced
secondary_wins value
(config)>
where value is one of:
n
n
TX54 User Guide
custom: Allows you to identify the IP address of a custom gateway to be broadcast:
(config)> network interface my_lan ipv4 dhcp_server advanced
gateway_custom ip_address
(config)>
none: An MTU of length 0 is broadcast. This is not recommended.
auto: No MTU is broadcast and clients will determine their own MTU.
custom: Allows you to identify a custom MTU to be broadcast:
(config)> network interface my_lan ipv4 dhcp_server advanced
mtu_custom mtu
(config)>
none: No server is broadcast.
auto: Broadcasts the TX54 device's server.
Local Area Networks (LANs)
167