Table of Contents
Advertisement
Services
Configure the device to accept location messages from external
sources
You can configure the TX54 device to accept NMEA and TAIP messages from external sources. For
example, location-enabled devices connected to the TX54 device can forward their location
information to the device, and then the TX54 device can serve as a central repository for this location
information and forward it to a remote host. See
information about configuring the TX54 device to forward location messages.
This procedure configures a UDP port on the TX54 device that will be used to listen for incoming
messages.
Required configuration items
The location server must be enabled.
n
UDP port that the TX54 device will listen to for incoming location messages.
n
Access control list configuration to provide access to the port through the firewall.
n
To configure the device to accept location messages from external sources:
WebUI
1. Log into the TX54 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Services > Location > Location sources.
4. Click to add a location source.
5. (Optional) Type a Label for this location source.
6. For Type of location source, select Server.
7. For Location server port, type the number of the UDP port that will receive incoming location
messages.
8. Click Access control list to configure access control:
TX54 User Guide
Forward location information to a remote host
Location information
for
595
Advertisement
Table of Contents
