What's New In Digi Tx54 Version 22.2 - Digi TX54 User Manual

What's new in Digi TX54 version 22.2

Release of Digi TX54 firmware version 22.2:
VPN enhancements:
n
Renamed VPN > IPsec > Tunnels > Policies > Local network setting to Local traffic
l
selector and added Remote traffic selector.
Added a Dynamic option to the Local traffic selector to configuration of a local network
l
by protocol and/or port instead of a network address range.
Added Protocol and Port match criteria for Local traffic selector and Remote traffic
l
selector.
Added VPN > IPsec > Advanced > Debug level to specify the logging verbosity of IPsec
l
messages in the device system logs.
Added the ability to use the on-board GNSS module as a time source.
n
Enhancements to communications with Digi Remote Manager:
n
Enhanced security for communications with Digi Remote Manager by using client-side
l
certificates.
The default URL for the device's Remote Manager connection is now
l
edp12.devicecloud.com. This URL is required to utilize the client-side certificate support.
New Switch SIM SureLink action for WWAN interfaces, which allows SureLink to be configured
n
to switch to the alternate SIM if the modem is connected but SureLink test are failing.
New Switch SIM fail count option to determine how many SureLink failures are required
l
prior to switching to the alternate SIM.
New Socket ID string option to send the configured text to the remote server(s) when a TCP
n
socket connection is opened to the serial port.
New system power ignition off_delay CLI command for manually adjusting the power off
n
delay from ignition sensors without having to adjust the configuration settings of the Digi
device
New cat Admin CLI command for displaying file contents.
n
TX54 User Guide 22