Digi TX54 User Manual page 174

Hide thumbs Also See for TX54:

Table of Contents

1. Log into the TX54 WebUI as a user with full Admin access rights.

2. On the menu, click System. Under Configuration, click Device Configuration.

The Configuration window is displayed.

3. Click Network > Interfaces.

4. Click to expand an existing LAN, or create a new LAN. See

5. Click to expand IPv4 > DHCP server > Advanced settings > Custom DHCP option.

6. For Add Custom option, click .

Custom options are enabled by default. To disable, uncheck Enable.

7. For Option number, type the DHCP option number.

8. For Value, type the value of the DHCP option.

9. (Optional) For Label, type a label for the custom option.

10. (Optional) If Forced send is enabled, the DHCP option will always be sent to the client, even if

the client does not ask for it.

11. (Optional) For Data type, select the data type that the option uses. If the incorrect data type is

selected, the device will send the value as a string.

12. Click Apply to save the configuration and apply the change.

Command line

1. Log into the TX54 command line as a user with full Admin access rights.

Depending on your device configuration, you may be presented with an Access selection

menu. Type admin to access the Admin CLI.

TX54 User Guide

Local Area Networks (LANs)