Show Surelink Status For A Specific Openvpn Client - Digi TX54 User Manual

Interfaces
2. At the Admin CLI prompt, type :
> show surelink openvpn all
OpenVPN Client
--------------
test_client1
test_client1
test_client2
test_client2
>
3. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Show Surelink status for a specific OpenVPN client

To show the Surelink status a specific OpenVPN client, use the
command:
1. Log into the TX54 command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Use the show surelink openvpn client name
OpenVPN client, for example:
> show surelink openvpn client test_client1
OpenVPN Client
--------------
test_client1
test_client1
>
3. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
TX54 User Guide
Test
--------------------
194.43.79.74 (Ping)
194.43.79.75 (Ping)
194.43.79.74 (Ping)
194.43.79.75 (Ping)
command to show the Surelink status of a specific
Test
--------------------
194.43.79.74 (Ping)
194.43.79.75 (Ping)
Show Surelink status and statistics
Last Response Status
------------- ------------------
29 seconds Passed
5 seconds Passed
21 seconds Failed
21 seconds Waiting for result
show surelink openvpn client name
Last Response Status
------------- ------------------
29 seconds Passed
5 seconds Passed
195