Task Two: Configure The Application To Run Automatically - Digi TX54 User Manual

Hide thumbs Also See for TX54:

Table of Contents

Applications

For example:

To upload a script from a remote host with an IP address of 192.168.4.1 to the

/etc/config/scripts directory on the TX54 device, issue the following command:

> scp host 192.168.4.1 user admin remote /home/admin/bin/test.py local

/etc/config/scripts/ to local

admin@192.168.4.1's password: adminpwd

3. Type exit to exit the Admin CLI.

Depending on your device configuration, you may be presented with an Access selection

menu. Type quit to disconnect from the device.

You can also create scripts by using the vi command when logged in with shell access.

Task two: Configure the application to run automatically

This feature does not provide syntax or error checking. Certain commands can render the device

inoperable. Use with care.

1. Log into the TX54 WebUI as a user with full Admin access rights.

2. On the menu, click System. Under Configuration, click Device Configuration.

The Configuration window is displayed.

3. Click System > Scheduled tasks > Custom scripts.

TX54 User Guide

Configure scripts to run manually