Digi TX54 User Manual page 257

Wi-Fi
Required configuration items
Enable the Wi-Fi access point
n
Select a Wi-Fi radio for the access point (dual Wi-Fi models only).
n
The Service Set Identifier (SSID) for the access point.
n
Configure security for the access point to WPA2 enterprise.
n
The IP address for one or more RADIUS servers.
n
The secret key for one or more RADIUS servers.
n
LAN/bridge assignment. Once you configure a Wi-Fi access point, you must assign the Wi-Fi
n
access point to a LAN interface or to a bridge. See
more information.
Additional configuration items
Determine whether to broadcast the access point's SSID.
n
Determine whether to isolate clients connected to this access point, so that they cannot
n
communicate with each other.
The server port for one or more RADIUS server.
n
The amount of time to wait before changing the group key.
n
To configure a Wi-Fi access point with WPA2 enterprise security:

WebUI
1. Log into the TX54 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > WiFi > Access points.
TX54 User Guide
Configure a Wi-Fi access point with enterprise security
Configure a LAN and Configure a bridge for
257