Digi TX54 User Manual page 317

Hotspot
The default is 10 minutes.
b. Set the lowest IP address in the range to assign to hotspot clients. This value represents
the low order byte of the IP address, and is combined with the subnet of the hotspot's
static IP address.
(config network hotspot new_hotspot)> ipv4 address dhcp_server lease_
start value
(config network hotspot new_hotspot)>
where value is any integer between 1 and 254. The default is 100.
c. Set the highest IP address in the range to assign to hotspot clients. This value represents
the low order byte of the IP address, and is combined with the subnet of the hotspot's
static IP address.
(config network hotspot new_hotspot)> ipv4 address dhcp_server lease_
end value
(config network hotspot new_hotspot)>
where value is any integer between 1 and 254. The default is 250.
15. Set walled garden settings.
Walled garden settings define the "white list" of domains and subnets that unauthenticated
clients are able to access. If external servers are used for client authentication, such as a
RADIUS server or HotspotSystem, they should be included in the walled garden settings.
Add domains that can be accessed by the client prior to authentication:
n
(config network hotspot new_hotspot)> add walled_garden domains end
domain_name
Repeat to add additional domains.
Add IP addresses and subnets that can be accessed by the client prior to
n
authentication:
(config network hotspot new_hotspot)> add walled_garden subnets end
value
where value is an IPv4 address and optional subnet mask, using the format IPv4_
address[/netmask], or the keyword any.
Repeat to add additional IP addresses or subnets.
16. (Optional) Change the default maximum download speed:
(config network hotspot new_hotspot)> bandwidth_max_down value
(config network hotspot new_hotspot)>
where value is an integer between 1 and 100000 and represents the maximum download speed
in Kbps.
TX54 User Guide
Hotspot configuration
(config network hotspot new
(config network hotspot new_hotspot)>
317