Digi TX54 User Manual page 818

Hide thumbs Also See for TX54:

Table of Contents

6. Configure whether the portal can be accessed over an insecure connection.

(config firewall portal portal1)> http value

(config firewall portal portal1)>

where value is one of:

allow: Allows access to the portal page over an insecure connection (HTTP port 80).

redirect: Automatically redirects the request to a secure connection (HTTPS port 443).

disallow: Does not allow access over an insecure connection (HTTP port 80).

This setting does not affect access to HTTP port 80 after the client has been granted

access to the portal.

7. Set the method that will be used to authorize the user:

(config firewall portal portal1)> auth value

(config firewall portal portal1)>

where value is one of:

none: Users are not required to enter any information to access the portal.

part of a user group that allows access to this portal.

info: Users are required to complete a form to continue. The form fields may be

8. (Optional) Set the title of the portal page that the user will see when accessing the portal:

(config firewall portal portal1)> title "Corporate portal"

(config firewall portal portal1)>

9. (Optional) Set a message that will appear on the portal page:

(config firewall portal portal1)> message "Welcome to the corporate web

(config firewall portal portal1)>

10. (Optional) Set the terms and conditions that ill appear on the portal page. Users will be

required to agree to the terms and conditions before being granted access to the portal.

(config firewall portal portal1)> terms "Accept the terms and conditions

of this portal"

(config firewall portal portal1)>

11. (Optional) Set the URL to which the user will be directed when granted access to the portal. If

left blank, the user will be directed to the domain of the URL in the original access request.

(config firewall portal portal1)> url https://myportal.com

(config firewall portal portal1)>

TX54 User Guide

Configure captive portals