Upload And Download Files; Upload And Download Files By Using The Webui - Digi TX54 User Manual

File system
2. At the Admin CLI prompt, type:
> rm /opt/temp/
rm: descend into directory '/opt/temp'? yes
rm: remove directory '/opt/temp'? yes
>
3. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Upload and download files

You can download and upload files by using the WebUI or from the command line by using the
Secure Copy command, or by using a utility such as SSH File Transfer Protocol (SFTP) or an SFTP
application like FileZilla.

Upload and download files by using the WebUI

Upload files
1. Log into the TX54 WebUI as a user with Admin access.
2. On the menu, click System. Under Administration, click File System.
The File System page appears.
3. Highlight the directory to which the file will be uploaded and click  to open the directory.
4. Click  (upload).
5. Browse to the location of the file on your local machine. Select the file and click Open to
upload the file.
TX54 User Guide
Upload and download files
scp
961