Digi TX54 User Manual page 840

Firewall
1. Log into the TX54 command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the Admin CLI prompt, use the
web-filter service:
> show web-filter
Enabled
Service
Device ID
>
If the device is configured to use Cisco Umbrella for web filtering, a device ID is displayed. The
device ID is a unique ID assigned to the device by Cisco Umbrella. If there is a problem with the
device ID, you can clear the ID. See
TX54 User Guide
show web-filtercommand to view information about the
: true
: umbrella
: 0004b5s63f5e2de7aa
Clear the Cisco Umbrella device ID
Web filtering
for instructions.
840