Schedule A Script To Run In The Container - Digi TX54 User Manual

Containers
>
3. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Schedule a script to run in the container

This simple example will:
1. Start the container in non-persistent mode.
2. Execute a ping command every ten seconds from inside the container.

WebUI
1. Log into the TX54 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click System > Scheduled tasks > Custom scripts.
4. For Add Script, click .
The script configuration window is displayed.
TX54 User Guide
Schedule a script to run in the container
848