Add A Usb Serial Port - Digi TX54 User Manual

Serial port
8. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Add a USB serial port

Your TX54 can be configured to support USB-to-serial adapters for serial access to the device, remote
serial out-of-band (OOB) access to other devices, or for use in python applications. The following USB-
to-serial chipsets are supported:
FTDI
n
Prolific
n
To add a USB serial port:

WebUI
1. Log into the TX54 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Serial.
4. For Add Serial port, type a name for the group and click .
The serial port configuration window is displayed.
TX54 User Guide
Add a USB serial port
215