Table of Contents
Advertisement
Serial port
b. (Optional) Enable monitoring of DCD (Data Carrier Detect) changes on this port:
(config)>path-parammonitor dcd true
(config)
12. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
13. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Configure Application mode
Application mode provides access to the serial device from Python applications. See
port
for information about creating serial ports in Application mode. See
ports
for information about creating Python applications that access the serial port.
To change the configuration to match the serial configuration of the device to which you want to
connect:
WebUI
1. Log into the TX54 WebUI as a user with Admin access.
2. On the menu, click System. Under Configuration, click Serial Configuration.
The Serial Configuration page is displayed.
Note
You can also configure the serial port by using Device Configuration > Serial. Changes
made by using either Device Configuration or Serial Configuration will be reflected in both.
TX54 User Guide
Configure Application mode
Add a USB serial
Use Python to access serial
204
Advertisement
Table of Contents
