Stop A Script That Is Currently Running - Digi TX54 User Manual

Applications
3. For scripts that are enabled and configured to have a run mode of Manual, click Start Script
to start the script.

Command line
1. Log into the TX54 command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Determine the name of scripts that are currently running:
> show scripts
Index
-----
0
1
>
3. Start the script:
)> system script start script1
>
4. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
5. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Stop a script that is currently running

You can stop a script that is currently running.

WebUI
TX54 User Guide
Label Enabled
----------- -------
script1 true
script2 true
Stop a script that is currently running
Status Run time
------ --------
active
idle 01:00
680