Use A Dead Reckoning External Usb Gnss Receiver - Digi TX54 User Manual

Services

Use a dead reckoning external USB GNSS receiver

The TX54 device supports an external USB GNSS receiver to provide dead reckoning-based location
information. The USB GNSS receiver is available for purchase from Digi International Inc..
The ability to use an external USB GNSS receiver is enabled by default. After purchasing the
USB GNSS receiver, plug it into a USB port on the TX54, and it will begin providing location
information.
To disable support for the external GNSS receiver, or enable it if it has been disabled:

WebUI
1. Log into the TX54 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Services > Location > Location sources > usb.
4. Click Enable the location source to disable the USB GNSS receiver, or to enable it if it has
been disabled.
5. Alternatively, you can also delete the usb location source:
a. Click the menu icon (...) next to the usb location source.
b. Click Delete.
TX54 User Guide
Location information
591