Reboot Your Tx54 Device; Reboot Your Device Immediately - Digi TX54 User Manual

System administration
5. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Reboot your TX54 device

You can reboot the TX54 device immediately or schedule a reboot for a specific time every day.
Note You may want to save your configuration settings to a file before rebooting. See
configuration to a

Reboot your device immediately


WebUI
1. Log into the TX54 WebUI as a user with Admin access.
2. From the main menu, click System.
3. Click Reboot.
4. Click Reboot to confirm that you want to reboot the device.

Command line
1. Log into the TX54 command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the prompt, type:
> reboot
TX54 User Guide
> modem firmware ota update name wwan1 version 24.01.5x4_ATT
Updating modem firmware ...
-----------------------------
Successfully updated firmware
Modem firmware update complete
>
file.
Reboot your TX54 device
Save
873