Configure The Speed Of Your Ethernet Ports - Digi TX54 User Manual

System administration
n
n
n
2. Connect the PC's Ethernet port to the ETH1 Ethernet port on your TX54 device.
3. Open a telnet session and connect to the TX54 device at the IP address of 192.168.210.1.
4. Log into the device:
Username: admin
n
Password: The default unique password for your device is printed on the device label.
n
5. At the shell prompt, type:
# rm /etc/config/.nocrypt
# flatfsd -i
This will re-enable encryption and leave the device at its factory default setting.

Configure the speed of your Ethernet ports

You can configure the speed of your TX54 device's Ethernet ports.

WebUI
TX54 User Guide
IP address for PC: 192.168.210.2
Subnet: 255.255.255.0
Gateway: 192.168.210.1
Configure the speed of your Ethernet ports
902