Table of Contents
Advertisement
Interfaces
a. Click to expand Authentication.
b. Click Enable server to enable the 802.1x authenticator on the TX54 device.
c. Type the Server IP address of the authentication server.
d. Server Port number defaults to 1812. Type a new port number for the authentication
server if different than the default.
e. Type the Server Password for the authentication server.
f. Set the Reauth period.
g. (Optional) Click to expand Accounting.
h. Click Enable server to enable 802.1x authentication auditing on the TX54 device.
i. Type the Server IP address of the auditing server.
j. Server Port number defaults to 1813. Type a new port number for the auditing server if
different than the default.
k. Type the Server Password for the auditing server.
9. Configure IPv4 settings:
a. Click to expand IPv4.
IPv4 support is enabled by default.
b. For Type, select DHCP address.
c. Optional IPv4 configuration items:
i. Set the Metric.
See
about metrics.
ii. For Weight, type the relative weight for default routes associated with this interface.
For multiple active interfaces with the same metric, Weight is used to load balance
traffic to the interfaces.
iii. Set the Management priority. This determines which interface will have priority for
central management activity. The interface with the highest number will be used.
iv. Set the MTU.
v. For Use DNS, select one of the following:
vi. Enable DHCP Hostname to instruct the TX54 device to include the device's system
name with DHCP requests as the Client FQDN option. The DHCP server can then be
configured to register the device's hostname and IP address with an associated DNS
server.
TX54 User Guide
Configure WAN/WWAN priority and default route metrics
Always: DNS will always be used for this WAN; when multiple interfaces have
n
the same DNS server, the interface with the lowest metric will be used for DNS
requests.
When primary default route: Only use the DNS servers provided for this
n
interface when the interface is the primary route.
Never: Never use DNS servers for this interface.
n
See
RFC4702
for further information about DHCP server support for the Client
n
FQDN option.
See
Configure system information
n
device's system name.
Wide Area Networks (WANs)
for further information
for information about setting the TX54
118
Advertisement
Table of Contents
