Digi TX54 User Manual page 825

Firewall
See
v. For Protocol, select the IP protocol matching criteria for this rule.
vi. For Source port, type the port, or any, as a source traffic matching criteria.
vii. For Destination port, type the port, or any, as a destination traffic matching criteria.
viii. Click to expand Source address and select the Type:
ix. Click to expand Destination address and select the Type:
Repeat to add a new rule. Up to 30 rules can be configured.
10. Click Apply to save the configuration and apply the change.
TX54 User Guide
https://www.tucny.com/Home/dscp-tos
Any: Source traffic from any address will be matched.
n
Interface: Only traffic from the selected Interface will be matched.
n
IPv4 address: Only traffic from the IP address typed in IPv4 address will be
n
matched. Use the format IPv4_address[/netmask], or use any to match any
IPv4 address.
IPv6 address: Only traffic from the IP address typed in IPv6 address will be
n
matched. Use the format IPv6_address[/prefix_length], or use any to match
any IPv6 address.
MAC address: Only traffic from the MAC address typed in MAC address will be
n
matched.
Any: Traffic destined for anywhere will be matched.
n
Interface: Only traffic destined for the selected Interface will be matched.
n
IPv4 address: Only traffic destined for the IP address typed in IPv4 address
n
will be matched. Use the format IPv4_address[/netmask], or use any to match
any IPv4 address.
IPv6 address: Only traffic destined for the IP address typed in IPv6 address
n
will be matched. Use the format IPv6_address[/prefix_length], or use any to
match any IPv6 address.
Configure Quality of Service options
for a list of common TOS values.
825