Digi TX54 User Manual page 235

Hide thumbs Also See for TX54:

Table of Contents

5. For Channel, select the channel. Only channels appropriate for the band are displayed.

6. Click Apply to save the configuration and apply the change.

Command line

1. Log into the TX54 command line as a user with full Admin access rights.

Depending on your device configuration, you may be presented with an Access selection

menu. Type admin to access the Admin CLI.

2. At the command line, type config to enter configuration mode:

3. Set the channel for the radio:

a. Determine available radios:

(config)> network wifi radio ?

Additional Configuration

---------------------------------------------------------------------

(config)> network wifi radio

b. Determine the band for the appropriate radio:

(config)> network wifi radio wifi1 band

TX54 User Guide

Configure the Wi-Fi radio's channel

Wi-Fi1 radio

Wi-Fi2 radio