Digi TX54 User Manual page 7

Revision Date
Trademarks and copyright
Digi, Digi International, and the Digi logo are trademarks or registered trademarks in the United States
and other countries worldwide. All other trademarks mentioned in this document are the property of
their respective owners.
© 2022 Digi International Inc. All rights reserved.
Disclaimers
Information in this document is subject to change without notice and does not represent a
commitment on the part of Digi International. Digi provides this document "as is," without warranty of
any kind, expressed or implied, including, but not limited to, the implied warranties of fitness or
TX54 User Guide
Description
range.
Added Protocol and Port match criteria for Local
l
traffic selector and Remote traffic selector.
Added VPN > IPsec > Advanced > Debug level to
l
specify the logging verbosity of IPsec messages in
the device system logs.
Added the ability to use the on-board GNSS module as
n
a time source.
Enhancements to communications with Digi Remote
n
Manager:
Enhanced security for communications with Digi
l
Remote Manager by using client-side certificates.
The default URL for the device's Remote Manager
l
connection is now edp12.devicecloud.com. This
URL is required to utilize the client-side certificate
support.
New Switch SIM SureLink action for WWAN interfaces,
n
which allows SureLink to be configured to switch to the
alternate SIM if the modem is connected but SureLink
test are failing.
New Switch SIM fail count option to determine
l
how many SureLink failures are required prior to
switching to the alternate SIM.
New Socket ID string option to send the configured
n
text to the remote server(s) when a TCP socket
connection is opened to the serial port.
New system power ignition off_delay CLI command
n
for manually adjusting the power off delay from
ignition sensors without having to adjust the
configuration settings of the Digi device
New cat Admin CLI command for displaying file
n
contents.
7