Table of Contents
Advertisement
Containers
Command line
Show status of all containers
Use the
show containers
on the system:
1. Log into the TX54 command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the prompt, type:
> show containers
Container
---------
mytest1
test_lxc
>
3. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Show status of a specific container
Use the
show containers container name
1. Log into the TX54 command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the prompt, type:
> show containers container test_lxc
Container
---------
test_lxc
TX54 User Guide
command with no additional arguments to show the status of all containers
Configured
Enabled
----------
-------
True
enabled
True
enabled
command to show the status of the specified container:
Configured
Enabled
----------
-------
True
enabled
View the status of containers
State
-----------------
STOPPED
RUNNING PID 19327
State
-----------------
RUNNING PID 19327
847
Advertisement
Table of Contents
