Disable Hardware Cryptographic Acceleration - Digi TX54 User Manual

Virtual Private Networks (VPN)
4. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
5. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
The device must be rebooted for the change to take effect. See

Disable hardware cryptographic acceleration

This option is only available for the TX54-Dual-Cellular device.
If you are experiencing problems when using IPSEC, such as the kernel crashing or unexpected
package loss, disabling hardware cryptographic acceleration may correct the problem.

WebUI
1. Log into the TX54 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Select System.
4. Click to disable HW crypto acceleration.
5. Click Apply to save the configuration and apply the change.
The device must be rebooted for the change to take effect. See
TX54 User Guide
Reboot your TX54 device.
Reboot your TX54 device.
IPsec
453