Table of Contents
Advertisement
System administration
l
l
l
The default is auto.
4. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
5. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
TX54 User Guide
10—Sets the speed to 10 Mbps.
100—Sets the speed to 100 Mbps.
1000—Sets the speed to 1 Gbps. Available only for devices with Gigabit Ethernet
ports.
auto—Configures the device to automatically determine the best speed for the
Ethernet port.
Configure the speed of your Ethernet ports
904
Advertisement
Table of Contents
