Digi TX54 User Manual page 947

Hide thumbs Also See for TX54:

Table of Contents

Central management

4. The interval between health sample uploads is set to 60 minutes by default. To change:

(config)> monitoring devicehealth interval value

where value is one of 1, 5, 15, 30, or 60, and represents the number of minutes between

uploads of health sample data.

5. By default, the device will only report health metrics values to Digi Remote Manager that have

changed health metrics were last uploaded. This is useful to reduce the bandwidth used to

report health metrics. This is useful to reduce the bandwidth used to report health metrics.

Even if enabled, all metrics are uploaded once every hour.

(config)> monitoring devicehealth only_send_deltas false

When disabled, all metrics are uploaded every Health sample interval.

6. (Optional) Tuning parameters allow to you configure what data are uploaded to the Digi

Remote Manager. By default, all tuning parameters are enabled.

To view a list of all available tuning parameters, use the show command:

(config)> show monitoring devicehealth tuning

TX54 User Guide

Collect device health data and set the sample interval