Potentiometer; How The Potentiometer Is Used - IDEC MICRO/I HG4G-CJT22 F-B Series User Manual

9 Potentiometer

9 Potentiometer

9.1 How the Potentiometer is Used

Writes a value to a word device by pressing a slider button.
• The slider display position increases and decreases while the button is depressed. The value of the slider at the
displayed position is written to the device address when the button is released.
Value of slider at
displayed position
Value of slider at
displayed position
Value of slider at
displayed position
Operation
and view
Slider
Value
Action
The slider indicates the value written to the device address. When the value is increased or decreased, the slider
display position also changes.
The slider moves between a user-defined minimum and maximum value.
The input value increases and decreases while the button is depressed. The value of the slider at the displayed
position is written to the device address when the button is released.
The slider display position does not change when the destination device address value changes unless it
was changed by the Potentiometer buttons. However, immediately after the screen is switched and
immediately after the part is displayed on the screen, the slider is displayed at the position specified by the
value of the destination device address.
8-160
HG5G-V HG4G-V
MICRO/I
0
105
127
Default state Press R-button
Stop Moves right
Increases
WindO/I-NV4 User's Manual
HG4G HG3G-V HG3G HG2G-V
External device
D0 :
D0 :
Write to device address
D0 :
Release Press L-button
Stop Moves left
Decreases
Write
HG2G-5F HG2G-5T HG1G HG1P
0
0
127
Release
Stop
Write