Table of Contents
Advertisement
Monitor the State of Each Alarm
■
Select this check box to check the alarm state per channel.
(Top Device Address): Specifies a word device to write the alarm state. Number of blocks x 16 (number of channels)
address numbers are used starting from the set device address.
For the device address configuration procedure, refer to Chapter 2 "5.1 Device Address
Settings" on page 2-68.
The following values are written to the bits depending on the alarm state.
Bit 15
Call Popup Screen
■
These settings configure the popup screen to display when an alarm occurs. The popup screen displayed when an
alarm occurs is called the alarm screen.
Call Popup Screen:
Select this check box to display the alarm screen when an alarm occurs.
Screen Number:
Specifies the alarm screen number (1 to 3015) to display when an alarm occurs.
Coordinates X, Y:
Specifies the coordinates to display the alarm screen.
With the upper-left corner of the screen as the origin, the upper-left corner of the alarm screen
is the X and Y coordinates.
The units and range for the display coordinates is as follows.
Specify the coordinates in 1 dot units.
X: 0 to (base screen horizontal size - 1)
Y: 0 to (base screen vertical size - 1)
Number of Stored Data
■
Specifies the maximum amount of Alarm Log data saved in the data storage area. Data is saved up to the set amount.
The maximum amount of data that can be saved in the data storage area is as follows.
HG5G/4G/3G/2G-V, HG4G/3G, HG2G-5F:
HG2G-5T, HG1G/1P:
Click
to open the Data Storage Area Management dialog box. You can change the allocation of data storage area
memory in the Data Storage Area Management dialog box. For details, refer to Chapter 16 "Data Storage Area" on
page 16-1.
Bit 3
Bit 0
0: Before alarm/a er recovery
1: A er alarm
Reserved
0: Second and later alarm (Alarm that has occurred again while an alarm is ac ve)
1: First alarm (First alarm that occurred)
0: A er confirm
1: Before confirm
11,660
5,520
WindO/I-NV4 User's Manual
3 Alarm Log Settings Dialog Box
13-15
13
Hide quick links:
Advertisement
Table of Contents
