IDEC MICRO/I HG4G-CJT22 F-B Series User Manual page 790

9 Numerical Display
Security Tab
●
This tab is used to restrict displaying and using the part by security groups.
This option can only be set when Use Security functions is selected. The Use Security functions check box is set
on General tab in the Security dialog box.
(Settings)
(Settings)
■
Displays the list of security groups used on the MICRO/I.
No.:
Group Name:
Display:
You can also switch between Permitted and Prohibited by right-clicking on a Display cell.
Security Settings
■
The Security Settings dialog box is displayed. If you create a security group in the Security Settings dialog box, you
can select that created group. For details, refer to Chapter 23 "2.2 Adding and Editing Security Groups" on page 23-
19.
For details about security functions, refer to Chapter 23 "User Accounts and the Security Function" on page
23-1.
10-184
Displays the security group numbers (0 to 15).
Displays the name of the security group.
Displays whether or not there is permission to display the part. Only Permitted security groups
can display this part. If all security groups are set to Permitted, this part will be displayed even
if no user account has been selected. Double clicking the cell switches between Permitted and
Prohibited.
WindO/I-NV4 User's Manual